Kitchen + Hard Water Foam Cleaner | 500ml x2

The Indian kitchen deals with two very different types of mess that require two very different formulas.

The area around the hob, the cabinet fronts, and the tiles behind the stove collect heavy cooking oil, turmeric, masala splatter, and burnt food residue an organic, grease-based mess that needs an enzyme and surfactant formula to break it down.

At the same time, the sink area, the tap fittings, and the countertop tiles collect a completely different problem hard water mineral deposits and limescale that build up from daily water contact and cannot be removed with a standard cleaner. Most homes try to address both problems with one product and get poor results on one or both.

This combo gives you exactly the right formula for each problem. Use the Kitchen Foam Cleaner across your tiles, hob surrounds, cabinets, and appliance exteriors to cut through grease and cooking residue.

Use the Hard Water Foam Cleaner on your sink, taps, chrome fittings, and the tiles around the sink to dissolve mineral build-up and limescale. Together they cover every cleaning challenge your kitchen has, in one purchase.

Step 1 - Start with the Kitchen Foam Cleaner on greasy surfaces

Shake the Kitchen Foam Cleaner. Spray foam evenly across tiles behind the hob, cabinet fronts, appliance exteriors, and countertops. Let the foam cling for 30 to 60 seconds. For heavy oil build-up or old masala staining, leave for up to 2 minutes. Wipe with a clean microfiber cloth or use a non-abrasive scrubbing pad for stuck-on residue, then wipe clean.

Step 2 - Apply Hard Water Foam Cleaner to the sink area and fittings

Shake the Hard Water Foam Cleaner. Spray foam directly onto taps, chrome fittings, the sink basin, and any tiles showing white or chalky hard water marks. Let the foam sit for a minimum of 1 minute longer for old or heavy limescale. Scrub with a non-abrasive brush or pad to loosen the dissolved mineral deposits.

Step 3 - Rinse the fitting and sink areas thoroughly

Rinse the areas treated with Hard Water Foam Cleaner thoroughly with clean water. The Hard Water Foam Cleaner should always be rinsed off do not leave residue on fittings. Dry with a cloth for a streak-free finish on chrome and fittings.

Step 4 - Wipe down treated greasy surfaces

Go back to the areas treated with Kitchen Foam Cleaner. Wipe down any remaining foam residue with a final clean dry cloth. No rinsing needed on tiles, cabinets, or appliance surfaces.

• Do not use Hard Water Foam Cleaner on natural marble, granite, or unsealed stone surfaces use only on tiles, glass, ceramic, and chrome fittings.
• Do not spray either product onto hot surfaces. Allow hob surrounds to cool fully before applying.
• Do not use both products simultaneously on the same surface apply one, wipe or rinse, then apply the other if needed.
• Avoid contact with eyes for both products. If contact occurs, rinse immediately with large amounts of water.
• Keep out of reach of children during application. Once surfaces are wiped or rinsed the area is safe