Fabric Foam Cleaner | 500ml x2

Over time, fabric surfaces trap dust, skin oils, food particles and spills deep within their fibres. Regular wiping removes surface dust but cannot break down embedded grime that makes fabric look dull and discoloured.

Invisel Fabric Foam Cleaner uses a dual-action enzyme and surfactant formula delivered in a foam. The surfactants loosen dust and oil particles while the enzymes break down organic stains at a molecular level.

Because it is a foam, it spreads across a large surface area evenly without over-wetting any single spot. The loosened stain and grime lift into the foam, making everything easy to remove with a dry cloth in one pass.

No soaking, no machine, no professional equipment. The fabric dries quickly and looks visibly cleaner and refreshed after a single application.

One 500ml can covers 250 to 300 square feet of fabric area.

Step 1 - Vacuum or brush the surface first

Remove loose dust and surface debris with a vacuum or dry brush before applying the foam. This lets the foam work directly on embedded stains rather than surface-level dust.

Step 2 - Shake well and spray

Shake the bottle well. Hold 15 to 20 cm from the fabric surface and spray the foam in a sweeping motion across the area you want to clean. The foam will spread across the surface on contact.

Step 3 - Brush the foam gently into the fabric

Using a soft-bristle brush, work the foam into the fabric in gentle circular motions. This helps the formula make contact with stains embedded in the fibres. Do not scrub hard — the foam does the work.

Step 4 - Let it sit for 2 to 3 minutes

Leave the foam undisturbed. The enzyme formula is actively breaking down stains and loosening trapped dirt during this time.

Step 5 - Wipe off with a dry microfiber cloth

Press a clean, dry microfiber cloth firmly onto the surface and wipe in one direction. The foam lifts off with the loosened dirt and stains. Use a fresh section of cloth as it picks up grime.

Step 6 - Repeat if needed and allow to air dry

1. Patch test on a small hidden area before full application - especially on dark, heavily dyed, or delicate fabrics.
2. Not suitable for leather, rexine, silk, or fabrics labelled dry-clean only.
3. Do not scrub - always use gentle circular brush motions and dry cloth blotting. Scrubbing can spread the stain or damage fabric surface.
4. Allow fabric to dry completely before sitting or using the surface to prevent re-soiling of the wet fabric.
5. Keep out of reach of children during application. Once the fabric is dry, the surface is completely safe.